GP-EDGE setting for windows

You will get most the data from GP home page. But there should be one correction. You have to use the init strig as " AT+CGDCONT = 1,"IP","gpinternet" " Now it will work without any problem.

EDGE/GPRS in Linux

Today me(lavluda) && salahuddin66 successfully configured GPRS/EDGE of Grameen Phone and Aktel in Linux. to check your mobile as a modem ------------------------------- #wvdialconf Grameen Phone here is a sample of my wvdial.conf (Grameen Phone EDGE/GPRS) ------------------------------------------------------------ [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","gpinternet" Modem Type = Analog Modem ISDN = 0 Phone = *99***1# Modem = /dev/ttyUSB0 Username = xyz Password = xyz Baud = 115200 ----------------------------------------------------------- change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone Aktel here is a sample of my wvdial.conf (Aktel GPRS) ------------------------------------------------------------ [Dialer Defaults] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Modem Type = Analog Modem ISDN = 0 Phone = *99***1# Modem = /dev/ttyUSB0 Username = xyz Password = xyz Baud = 115200 ----------------------------------------------------------- change the modem speed/Baud and /dev/ttyUSB0 according to your mobile phone Start To start type wvdial in shell

welcome everyone

owo at last i started with blogspot.